Hey, I’m William. I put together this store to provide a much needed service to the automotive tuning community. I specialize in Gen V GM Engines that are controlled by the E92 ECU. I have been working to close the gap in what HP Tuners provides and what the community needs to be able to correctly tune Supercharger setups.
Just to be clear, I will not accept requests to disable any Emissions equipment. Nor will I help in the disabling of engine codes or defeating any Emissions requirements.
The Items in the shop are Tables I have located in the E92 Calibrations. To find these tables, I used the raw binary from the ECM to find locate and identify tables. These parameters I have specified in the shop I will change in tune files provided and provide back to customers the adjusted HPT file that can then be flashed onto the vehicle. This service is per HPT file and does not transfer between calibration files.
If the customer wishes, I can provide the XDF file used to adjust the calibration. A XDF file is a definition file that is built using TunerPro. VCM suite has the ability to load and interpret these files, and allow adjustment of the parameters defined in the XDF file. This ability is hidden behind the ‘User Defined Parameters’ service that can be purchased from HP tuners.
I do not provide the ability to open XDF files in VCM suite.
Please See HP tuners documentation on User Defined Parameters.
User Defined Parameters Support Page
User Defined Parameters Product Page
